Copyrights Micro Seven,
Inc., 2024
Apple, the Apple logo, iPhone, and iPad
are trademarks of Apple
Inc., registered
in the U.S. and other countries and regions. App Store is a service mark of Apple Inc.
Alarm Receiver PCB assembly,
PCBA-001 for
adding features in your product for receiving digital alarm messages from alarm
panels with Contact-ID, Pulse 4+2 and SIA-FSK F1.
DC09Tester, with SIA-DC09
transmitter (client function) and receiver (server function) in Windows
software for testing your DC09 products
DC09Tester-EQT,
with SIA-DC09 transmitter with encryption and receiver in Windows software for
testing your DC09 products, still only available for U.S. companies and US
foreign offices.
Test
Internet lines for alarm panels, Test System 101 with
AP70, LS15E+ TRIPLE, and software for testing Voice-Over IP lines by
transmitting and receiving alarm messages in multiple alarm protocols by PC
app. It contains auto-dialing without PC app. (very popular products)
AP70, ALARM-PANEL
SIMULATOR or PC ALARM CONTROL PANEL for transmitting alarm signals in popular
Contact-ID, SIA-FORMAT, and PULSE 4X2 formats from PC or automatically without
PC with optional Automatic Dialer Option. (very
popular products), AP70 contains delay time to receive delayed receiving
kiss-off in cellular communication.
AP70+ contains both Ethernet and telephone circuits
for sending alarm messages in three protocols to central stations via telephone
line and Internet/Network IP servers by RS232 commands. Optional AES encryption
of IP messages is available to US customers.
LS15E+TRIPLE, alarm
receiver/simulator with both FXS and FXO interfaces in popular Contact-ID,
SIA-FORMAT and PULSE 4X2 formats at simulated telephone line (FXS) at line 1 or
at modem port (FXO) at line 2 with built-in audio monitor and RS232 interface.
(very popular products)
IP108 replaces phone lines and alarm
monitor company subscriptions by sending emails and IP messages of events instead of using
telephone lines.
Don’t
spend any money for paying monthly telephone line and alarm company
subscriptions. Events are sent to multiple email addresses, and IP messages are
also sent simultaneously to leased low-cost IP server.
CA10, New-Cellular
Adapter for Contact-ID alarm panels which solve connection problems with
Contact-ID alarm signal receivers.
AP72, 2048 line Auto-Dialer and Alarm Central Tester
For continuously testing central
station phone lines and alarm receivers for 24/7 ! 2048
2048 line Auto-Dialer and Alarm Central Tester for testing all your telephone
lines and associated alarm receivers. It contains Auto Dialer so that no new
additional software is required. Emails are generated to notify which telephone
line and its alarm receivers are defective. Contact-ID, Pulse 4+2 and SIA
Format FSK1 & FSK2 (new added protocol) are supported. An IP
option for email and IP messages is also available. There are three types of
AP72s for supporting 512, 1024, or 2048 lines, and IP option is available for
sending emails and test results to IP server. Dialing into cellular
communication with long kiss-off tone delay up to six seconds works great for
all Micro Seven telephone dialers, AP15, AP70 and AP72!
RAP15-4, IP Telephone-Dialer receives
encrypted IP/DC09 digital alarm messages for AES 128, 192,
and 256 bit keys over Internet, dials telephone numbers and transmit
Contact-ID messages at telephone line interface. Received IP messages are
stored in que for sending all converted Contact-ID messages in a single
telephone call.
IP
dialers for transmitting DC09 messages by RS232 input AP30, http input RAP15-3, and alarm
signal monitoring IP105
Test
System 201 with AP71, LS15K, and software for testing Voice-Over IP
lines by transmitting and receiving alarm messages in multiple alarm protocols
by PC app. It contains auto-dialing without PC app.
AP71
for PC-app-transmitting Contact-ID, SIA FSK Format F1 and F2(BFSK), SIA Pulse
Format P1(3/1 14), P2(3/1 23), P3 (most popular pulse protocol), P4 (Radionics
3-1), and the Programmable Pulse Format for ID field, # of transmission,
handshake/kiss-off tones, carrier frequency, data field, verification/checksum
field, etc.
LS15K
with FXO and FXS interfaces for receiving Contact-ID, SIA FSK Format F2(BFSK),
SIA Pulse Format P1(3/1 14), P2(3/1 23), P3 (most popular pulse protocol), P4
(Radionics 3-1), and the Programmable Pulse Format for ID field, # of
transmission, handshake/kiss-off tones, carrier frequency, data field,
verification/checksum field, etc.
QP20,
New-Panic Switch/Alarm provides medical or emergency alert to your other family
member when the panic button is pushed. Your loved one may live forever after hearing
the siren and saving your loved one.
It is a
low-cost unit. It does not require any contracts with alarm companies, and it
requires no telephone line nor internet either.
QP20 may
also be served as a Local burglar alarm that sounds siren when excessive sound
is detected near the unit for 24hr protection or at night time only.
CM10A and CT10A, new low-cost Contact-ID
and Pulse 4+2 alarm receiver CM10A for FXS or CT10A for FXO interface for alarm
installers and test technicians
System Configuration, ATS1000, Alarm Test System monitors outgoing alarm signals and transmitting IP
messages, starting IP105-3 for three protocols or IP105 for Contact-ID, IP
server software (ip105server.exe), and optional IP hardware server ER15A, and
optional Contact-ID dialer AP15-4
IP105 Alarm Monitor
Multi-Protocols, which monitors alarm message transmission by alarm panels and
transmits IP messages via Internet/Ethernet. It is for Contact-ID, SIA-FSK F1
or Pulse 4+2 mode. Encrypted IP messaging is also available as an option for
U.S. customers.
The alarm monitor inputs analog alarm messages on telephone line, builds DC09
messages and transmits on Internet. IP105 is similar to IP108 but IP105 keeps
existing telephone connections.
AR100(NEW)
4-port alarm receivers for Contact-ID, Pulse Format, and FSK Format with simple
RS232 software commands.
AP100(NEW)
4-port PC Alarm or 4-port PC Alarm Dialer for sending alarm messages to four
Central Stations simultaneously by PC Software is newly announced. It is
equivalent of four AP70 PC Alarm Dialer for sending various alarm messages in
Contact-ID, Pulse Format, and FSK Format with simple RS232 software commands.
AP71(NEW) for
PC-app-transmitting Contact-ID, SIA FSK Format F1 and F2(BFSK), SIA Pulse
Format P1(3/1 14), P2(3/1 23), P3 (most popular pulse protocol), P4 (Radionics
3-1), and the Programmable Pulse Format for ID field, # of transmission,
handshake/kiss-off tones, carrier frequency, data field, verification/checksum
field, etc.
LS15K(NEW) with FXO and
FXS interfaces for receiving Contact-ID, SIA FSK Format F2(BFSK), SIA Pulse
Format P1(3/1 14), P2(3/1 23), P3 (most popular pulse protocol), P4 (Radionics
3-1), and the Programmable Pulse Format for ID field, # of transmission,
handshake/kiss-off tones, carrier frequency, data field, verification/checksum
field, etc.
Test SystemTS101 with AP70/AP80, LS15E+ TRIPLE, and software for testing Voice-Over IP lines by transmitting and receiving alarm messages in multiple alarm protocols by PC app. It contains auto-dialing without PC app.
IP108A
for home or office uses-No alarm
companies involved and no telephone lines needed using.
LS15E+TRIPLE-Q, Alarm
Receiver/Simulator and Alarm Panel Tester and iPhone app
AP15q, Alarm Dialer,
transmits Contact-ID, SIA-FORMAT, and pulse 4X2 messages wirelessly from iPhone® app.
VM10a (new) Wireless Scope Meter, model VM10a,
Oscilloscope with Digital Multi-meter. VM10a
is a peripheral device that transmits measurement result to iPhone.
IP108, bypasses
telephone lines and sending alarm messages via Internet. It supports three
protocols, Contact-ID, Pulse 4+2, and SIA-FORMAT.
AP15-4: Contact-ID message dialer and Alarm-Panel
Simulator for sending digital alarm message from RS232 interface, typically
used in Nurse-Call system to send alarm messages including area and room number
information from PC software
LS110-4, 4-line telephone line simulator
IP104, with two loop detections as a new alarm
panel transmitting IP/DC-09 type messages with or without conventional
telephone
dialing function, Ethernet or Wi-Fi interface model, and email transmission
capability
CP100, with loop, sound and temperature sensors with
programable by PC and/or iOS interfaces.
LS300
Advanced Telephone Line Simulator
ls15, battery-operated telephone
line simulator
LS110-2E (shown above)
and IP107 (below),
Alarm Panel Tester/Telephone Line Simulator
ls200-8, 8-port TELEPHONE
LINE SIMULATOR
MICRO SEVEN, INC.
Oregon, U.S.A.
Phone: 503-645-3942 (on
U.S. pacific time)
Pleasse call inquiries of your custom orders or helping your projects with
our expertise of telephone lines and alarm dialers/receivers are also welcome.
sales@microseveninc.com
Price
List Contact
us Order
sheet